Marisa Hetrick

Repairs to uPVC Windows uPVC windows are an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they are not susceptible to rust or rot. Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce unnecessary repair costs and also increase energy efficiency. 1. Broken Glass If the glass in your window is broken it can cause a huge deal of damage to your home, making it extremely dangerous and possibly fatal. It is important to take the time to ensure that you're doing all you can to keep your windows in good repair. Single-pane windows are relatively simple to replace, and they generally fit into frames that were previously in use very easily. However, if you have double-pane windows that are secured by internal beading it will be more difficult to remove the panes that are in place and replace them with new ones. In this situation, you will need to source some plastic spacers to assist the new pane to fit correctly into the window frame. Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric, not onto the floor and could be trampled. Once the glass is removed from the window, it's best to cover the gap with clear packaging tape or duct tape to block water and drafts from getting into the property until a professional comes out and repair the window. It also acts as an obstacle to stop intruders from getting into your home. If the gap between the window and the door is significant, you may need to consider an alarm system that includes a window. This will provide the best of both. 2. Sagging uPVC is durable, energy-efficient and affordable alternative to timber sash windows. In time, they could develop a variety of issues such as sagging. A sagging window in uPVC can cause issues with light, draughts, and even security. It's important to take action as soon as you notice your uPVC windows are falling down. To repair a window that is sagging, you can try repositioning the hinges. You'll first need to open the windows so you can access the frame. With a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having moved your hinges. If you are happy with the size of the window, tighten the screws to secure them in place. If you can't reposition the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to lose their tightness. It is important to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof. uPVC handles may also loosen. This is often caused by screws that have been removed over time, but it could be due to the handle mechanism wears out. Luckily, it's not difficult to repair a loose uPVC window handle yourself. The first step is to close the window and then perform an initial test fit. The corners of the sash should be aligned with the casing joint. If it doesn't, you can use a screwdriver to loosen the handle and then turn the mechanism back into its original position. 3. Water Leaks It is important to take action if wake up every morning to find a smoky wall and wet floors. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant. This is an easy fix that can be completed by any DIYer who has the ability. Depending on the severity of the problem is, the old caulking may have to be removed. It is important to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk in order to make the area more difficult to clean and can decrease the efficiency of your energy usage. It is important to check that the drainage holes are clear of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more severe situations, you may have to replace the window. Moldy sills and rotten ones are other signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the house. It is also important to remember that if the leakage is coming from between the glass of your double-glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sagging. Again this can easily be repaired by a uPVC window repair expert who can replace the glass seal and regain the full insulation properties of your windows. 4. Faulty Hinges If your uPVC windows are stiff to open, or are loose and blow open with ease It could be hinges at fault. These are easily repaired by any skilled DIYer and can usually be done within a few minutes. Like any mechanical component hinges will be damaged over time. It is very easy to replace a hinge on a window, but it's easier if someone else helps hold the frame. Make sure that the uPVC hinges are open and closed in the correct direction. You can check this by looking for the arrows on each hinge, this indicates which way the window should be opened. The issue can be caused due to opening the window in the wrong way or due to a poor installation in the factory. Sending us a photo through our website can often resolve the problem. We are more than happy to give advice. It is also important to lubricate the hinges regularly. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window operate and close more easily. It can also stop corrosion and reduce the risk of sticking. This must be done at a minimum once a year. WD40 or other solvent-based lubricants should not be used since they can damage your uPVC windows. 5. Draughts Draughts in upvc windows can be caused by a few various factors. First, the hinges because of wear and tear, can become misaligned, this can cause gaps to develop where the sash meets the frame. They can be repaired by giving them a thorough clean, however if they are beyond repair it might be necessary to get them aligned or replaced. Secondly the interlock, this is located on the hinge side of the window and can be misaligned. Again, it's feasible to give them a good clean, but in certain cases, it may be necessary to have these replaced. These seals are susceptible to wear and tear or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures and will reduce the possibility of draughts. Lastly, one of the most effective ways to cut down on draughts is by using a draught excluder. These are typically made of fabric which are filled with a sort of filler and can be put on the windowsill on top. These will keep your home warm by blocking cold air. With a bit of regular maintenance and repair your windows made of upvc will provide an excellent level of security and insulation for your home. It is crucial to recognize that all windows have a lifespan and they may reach a point where it is more economical to replace them than repair them. If you are having issues with your upvc windows, it is recommended to seek help from a professional as soon as you can.